Thermis Log 10TH USB Temp & Humidity Logger
Two channels for the recording task
See the conditions locally. Keep the completed record.
A configurable, single-use temperature and humidity logger with an LCD display, event marks, and automatic USB reports for sensitive storage and transport tasks.
Thermis Log 10TH records temperature and humidity during a defined storage or transport task. Its LCD screen provides local readings and status, while the USB connection makes the report available to the team reviewing the completed record.
The recording parameters are configurable before start, allowing the interval, delays, and alarm settings to reflect the task. The 10TH model includes humidity sensing; the separate Thermis Log 10T is temperature-only. Confirm the exact supplied model and recording duration when selecting a unit.
- Temperature + RH10TH measurement channels
- Single-useConfigurable before start
- LCD & USBLocal status and report access
Configured for the application
A local display and a record for review.
Select the parameters around the product requirements and the way the record will be assessed.
Temperature and humidity channels
The 10TH model captures both measurements, with LCD readings and alarm status available at the device.
Pre-start configuration
Set supported recording parameters before starting the single-use task, including the interval, delay, and alarm points.
Marks and temporary reports
Use the supported event-mark function to identify key moments. A temporary report mode is available for an interim review.
Automatic USB reports
Obtain PDF and CSV report options through direct USB connection without export software. Confirm the selected report format and supplied documentation.
Technical details
Details for the 10TH model.
Manufacturer information for Thermis Log 10TH. Confirm the supplied version, duration, and configuration for the task.
- Use type
- Single-use
- Measurements
- Temperature and relative humidity
- Temperature range
- −30°C to +70°C
- Temperature accuracy
- ±0.3°C over the full range
- Humidity range
- 0–100% RH
- Humidity accuracy
- ±3% RH at 25°C, 20–80% RH; ±5% RH elsewhere
- Display
- LCD and LED
- Maximum alarm points
- Six
- Maximum event marks
- Nine
- Connection
- USB
- Protection
- IP65
- Dimensions
- 94 × 41 × 8 mm
Prepare the single-use task
Configure. Start. Retrieve.
Use the operating instructions and configuration tools supplied for the selected version.
Set the parameters
Confirm the 10TH model and configure the supported interval, delay, alarm, and report settings before the task starts.
Start and place
Start the logger using its instructions and place it at the defined location. Use the screen to review running status and the supported mark function when needed.
Review the report
Use the temporary-report procedure for an interim check, or stop the task as instructed and connect by USB for the final report. Retain the files with your monitoring records.
Sensitive storage and transport
Record both channels for the review ahead.
Assess suitability against the product conditions, required interval, and expected recording period.
Pharmaceutical distribution
Document temperature and humidity for a defined consignment, using settings chosen for the goods and their handling requirements.
Laboratory storage tasks
Collect a two-channel environmental record around sensitive materials for review alongside the laboratory’s storage requirements.
Refrigerated storage
Use the local display and completed report to review the conditions in a specified cabinet, cooler, or storage area.
Product enquiries
Set up the two-channel record you need.
Share the required temperature and humidity conditions, task duration, interval, alarm settings, and report requirements. Celsius can discuss the supplied version and configuration.
Enquire about this productHow does Thermis Log 10TH differ from 10T?
The 10TH records temperature and humidity. The 10T is temperature-only. Choose the model according to the measurements needed for the product and recording task.
Is Thermis Log 10TH reusable after downloading the report?
No. Thermis Log 10TH is a single-use logger. A temporary report is available through the supported procedure during the task, but the device should not be selected as a reusable logger for successive trips.